Description
JET Tools 714800 JWBS-20-3, 20″ Bandsaw, 3HP, 230V
The JET JWBS-20-3 is a 20-inch, 3 HP, 230V steel-frame bandsaw built for resawing and detail work on larger stock. It features a cast iron trunnion for stability, a rigid four-sided guide post with rack-and-pinion adjustment, and dual 4-inch dust ports, with a table that tilts 5 degrees left and 45 degrees right.
Features
- Blade tracking window provides clear view of blade during tracking.
- Cast iron handwheels and ergonomic-designed knobs make adjustments smooth and easy.
- Cast iron trunnion for maximum support and stability.
- Conveniently located dual 4″ dust collection ports catch dust and chips at the source.
- Easy-to-read blade tension scale can be viewed through upper door window.
- Heavy duty tensioning with quick release and three settings: full tension, partial tension, and full release.
- Rigid, four-sided guide post with rack and pinion adjustment for optimum blade support.
- Round table insert features leveling screws for precise adjustment.
- Single knob adjustment simplifies the blade tracking process.
- Table tilts 5° left and 45° right to accommodate a wide variety of cuts.
Specifications
| Stock Number | JT9-714800 |
| Model Number | JWBS-20-3 |
| Band Saw Size/Wheel Diameter (In.) | 20-1/4 |
| Minimum Saw Blade Width (In.) | 1/8 |
| Cutting Capacity Height (In.) | 16 |
| Cutting Capacity Width (In.) | 20 |
| Dust Collection Minimum CFM Required (CFM) | 400 |
| Table Size (L x W) (In.) | 27-1/4 x 20 x 1-5/8 |
| Motor Power (HP) | 3 |
| Recommended Circuit Size (Amps.) | 30 |
| Motor Amps | 12 |
| Table Height from Floor (In.) | 37 |
| Net weight | 588 |
| Gross Weight | 660 |
