Description
Fleetguard AF25033M is a radial-seal primary (outer) air filter for John Deere 9000-series tractors and combines and Case IH Steiger 4WD tractors, replacing John Deere RE63931 / AH148880, Case IH 319468A1 / 2005895C1, Donaldson P533235, and Baldwin RS3530. The filter uses high-capacity cellulose media (18.63 in OAL, 13.05 in OD) and pairs with the Fleetguard AF25430 secondary safety element in a two-stage air cleaner.
Specifications
| Manufacturer | Fleetguard (Cummins Filtration) |
|---|---|
| Part Number | AF25033M |
| Part Type | Primary Air Filter (Outer) |
| Filter Style | Radial Seal |
| Media Type | Cellulose |
| Overall Height | 473 mm (18.63 in) |
| Outer Diameter | 331 mm (13.05 in) |
| Inner Diameter (Top) | 172 mm (6.78 in) |
| Inner Diameter (Bottom) | 328 mm (12.9 in) |
| Direction of Flow | Outside to Inside |
| Safety Filter | AF25430 (sold separately) |
| Country of Origin | Mexico |
Cross References
This air filter replaces or is equivalent to the following part numbers:
- John Deere: RE63931, AH148880
- Case IH / International: 319468A1, 2005895C1, 1694039C1
- Caterpillar: 3I1994
- Baldwin: RS3530, RS3530XP, P530276
- Donaldson: P533235, P530276
- WIX: 46745
- NAPA: 6745
- FRAM: CA7466
- Purolator: AF2275
- Luber-Finer: LAF1953
- AC Delco: A1537C
- Hifi-Jurafil: SA16316
- Mann: C341600
- Alliance: ABPN10GAF25033M
Applications
This primary air filter fits the following John Deere equipment:
- John Deere Tractors: 6510, 9100, 9100T, 9120, 9200, 9200T, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9510, 9520, 9520T, 9620, 9620T
- John Deere Combines: 9540, 9540i, 9550, 9560, 9560i, 9580, 9580i, 9610, 9640, 9640i, 9650, 9660, 9660i, 9680, 9680i, 9750, 9780, S440, S550, S660, S670, S680, S690, S760, S770, S780, S790, T550, T560, T660, T670, W540, W550, W650, W660, C670
Also fits the following Case IH / International Harvester equipment:
- Case IH Steiger Tractors: STX375, STX425, STX440, STX450
Two-Stage Filtration System
This primary (outer) air filter is designed to work with the Fleetguard AF25430 secondary (inner/safety) filter. The primary captures the majority of airborne contaminants while the safety provides backup protection during primary service or in case of primary failure. Inspect the safety filter at every primary change and replace it if damaged or after multiple primary changes.
This is the primary (outer) filter only. The secondary/safety filter (AF25430) is sold separately. Verify your air cleaner housing accepts this filter before ordering and consult your operator’s manual for service intervals.
